What is coring?
In construction, coring is a process of removing a cylindrical block of concrete from the rest of the structure means the bit will be made a circular cut leaving a cylindrical block inside instead of drilling everything out.
What is a coring machine/Core drill machine?
Coring machines are used to core out a hole in any concrete structure.
When core drills are used?
Cored drills have a wide variety of uses.
Consider we have to drill 20mm diameter holes in reinforced concrete and we start drilling with a normal hammer drill and face rebar. Normal concrete drill bits don’t have the capacity to drill in the rebars. So at this point, we need a coring machine with a coring bit (diamond tip). The coring machine will core out the rebar allowing us to achieve the desire embedded depth for anchor bolts.
We were given the task of making an opening of around 500mm (or any dia) hole in a wall/slab/roof or any other reinforced concrete structure for some HVAC use. So coring machine is the best option to carry out this job cost-effectively and efficiently.
The good thing about core drill machines is, we can use them to core overhead holes. This means we can utilize them in any position.
Things to Remember
Before buying a core drill machine one should have a clear idea of where he is going to use it. Following are the factors to look at before buying a core drill.
Type of work
Whether you have to drill small diameter holes in an RCC slab or big holes for HVAC or other services.
Position of holes
Whether you are going to make vertical holes, horizontal holes, or overhead holes.
Rebar dia to cut
The Rcc slab you are going to the core is the diameter of the rebars in it.
All the above factors help you in buying a perfect coring machine for your job. An example is if you want to buy a core drill for overhead holes. The following factors would apply.
The lighter the machine the better.
The water supply should be strong and consistent.
Water guard is of paramount importance to prevent water from falling back into the machine.
The machine stand should be light, easy, and convenient to fix.
The machine should be waterproof (as the machine will work upside down so water will flow on to machine water guard will prevent it from flowing back to the machine still chances are high for water to go inside the machine. The water source should be powerful and consistent. Machine mounting should be fixed properly with the roof with bolts in all the slots available for fixation. Level the machine on the mounting to make sure the machine is firm and strong.
7 Best Coring Drill Machines 2021
- CS Unitec DBE 200 Core Drill Machine
- VEVOR 6.9 Inch/175MM Core DrillMachine
- AnEsoil Diamond Core Drilling Machine
- QWERTOUR Dual-Purpose Core Drill Machine
- Huanyu Core Drilling Machine
- NEW 8″ Z-1 BLUEROCK Tools CORE DRILL W/STAND CONCRETE CORING Drill Machine
- Milwaukee 10 Core Drill Machine
There are many types of drills and machine tools, but there are only a few that claim to be the most innovative and out-of-the-box (or “core”) drill machines available. While many of these drill machines have their pros and cons, there aren’t many other drilling machines out there that can match the versatility of these machines.
Core drill machines (also known as DY drills) are an essential tool in the maintenance of a good quality drill press. The best drill presses come with a powerful motor, a flexible chuck, and a good number of accessories. You also need to consider the size of your rig and how much space it takes up. In order to choose the right drill machine for you, you should have a look through this article.
Core drills are great for many different reasons, and one of the best reasons is that they’re extremely versatile. They can be used for almost every type of drill you’d find in a “normal” drill press, and many other features. A good example of this versatility is the Raptor Core Drill.
Core drill machine working
What bit to use for core drilling?
Many different types are diamond bits are available in the market. Basically, they are divided into 2 categories
Wet bits required a lubricant or a cooling fluid constantly flowing through the bit. If not provided the bit will wear off quickly. While coring through an RCC slab lubricant is a must.
There are many international as well as local brands available while buying the bits. You will understand the quality of the bit with experience only. “More expensive the bit the better it is” is not always true. I have come across bits that are cheap and the best performers. It also depends upon the operator. Untrained operators destroy the bit very quickly than a trained professional.
Dry bits do not require any coolant or lubricant but have limited usage and cannot be used to cut big diameter rebars. Most commonly used in coring masonry. The advantage is we can use dry bits directly in the handheld machines without mounting.
Before we start with our list here are some honorable mentions from my own experience.
Hilti core drill machines (very strong and powerful but costly).
Dr benders core drill machines (lightweight and best performers especially for overhead holes).
Spit corer drill machines (Robust and strong, durable).
Yes, I’m aware that there are a lot of Core drill machines out there. I would have expected most of you to have heard about them by now. Therefore, I thought I would do a little post to let you know some of the advantages and disadvantages of the best drills available at the moment.
Best Coring Drill Machines 2021
1. CS Unitec DBE 200 8″ Capacity Concrete Core Drill – Wet Diamond Core Drilling Rig – for Concrete, Brick, Block, and Stone – Made in Germany – 110V
This monster machine from Germany (Eibenstock) is capable of drilling up to an 8” diameter hole. Operational voltage Is 110 volts and a powerful motor of 18amp. The machine is capable of coring in reinforced concrete, asphalt, marble, ceramic, walls, etc.
The motor is capable of producing a top speed of 750rpm and 450 rpm load speed. The machine is loaded with an oil bath gearbox along with the motor for lubrication, safety, and cooling. Water supply can be connected with a simple garden hose type connection (GFCI) over cut-off protection standard.
Mounting is only 34 pounds for easy installation and handling.
Package Dimensions 35 x 15 x 9.2 inches; 38.25 Pounds.
Thread type chuck for the bits.
- Switch with GFCI overcurrent cut-off protection against overloading of the motor
- Cut-off carbon brushes – protection of the motor
- Mechanical safety clutch
- Space-saving, compact drilling unit – lightweight
- Powerful, 18 Amp motor; Motor and rig as a complete unit.
- 1-speed oil bath gearbox – optimal lubrication.
- Integrated water supply.
- Stainless steel spindle for connecting to 1¼” drill bits.
What is inside the box?
A drilling machine (motor).
A stand with handles and leveling fixtures.
2. VEVOR 6.3 Inch/160MM Core Drill Machine,1980W Core Drill Rig,Powerful Rugged Concrete Core Drill,110V 1600 r/min Core Drill Rig,with Stand Tool Dry Wet Dual Use Concrete Brick Block Drilling
The diamond drilling machine is used for drilling reinforced concrete, red brick, marble, and other materials. It is widely used in installing air conditioners, pipes, stair railings, highways, and airports.
This machine is capable of drilling 6.9” or 175mm diameter holes. The motor has a top speed of 750rpm with a maximum power of 2460wats and 110v input voltage. The product weighs 45 pounds. It has a robust water inlet design and is made of copper. Water flow is controlled by a wall. It has a threaded chuck for the diamond bits
- Powerful Motor
- Pure Copper Inlet
- Steel Output Shaft
- Aluminum Guide Rail & Base
1 x Diamond Drilling Machine
1 x Diamond Bit (108 mm)
1 x Manual
1 x Leakage Protector
1 x Accessory Set (1 x Φ5 hex socket wrench, 1 x Φ6 hex socket wrench, 1 x 17-19 offset spanner, 1 x 200-type trap, 1 x Internal expansion bolt, 1 gasket, 1 x set of water pipe + joint)
3. AnEssOil DiamondDiamond Core Drilling Machine 180mm 7.1 Inch Max Diamond Core Drill Rig Wet/Dry Drilling for Diamond Concrete Drilling 220V 3000W
This is a very convenient machine for working at the borosilicate glass. It is very important in this kind of work to make the best use of time, and this machine helps to do it. It is with this machine that we can do drilling and cut on the borosilicate glass in less than one minute.
Acrylic Drilling Machine is used to produce precision components or hard materials. It is used to make the working surface of the drilling machine, and it is used to make high-precision components such as cutting tools, fine parts, etc. and it can be applied in many fields such as chemical factories, nuclear power plants, petrochemical enterprise, and other similar enterprises. The acrylic drilling machine is used for drilling holes with special structures. This machine is mainly used for core drilling
The machine is capable of coring 180mm/7inches hole.
This machine comes with a powerful motor capable of producing 1800rpm and 3000w.
Input voltage is 220v ac
It has a mechanical clutch design
Current overload protection system for fluctuating currents
It has a Copper water inlet
Variable speed switch
Product weights 6kg
The machine has a threaded adapter for the bits.
This Diamond Drilling Machine can be equipped with a stand by yourself.
3 ways to install the handle, easy to drill at various angles.
All-copper motor, fast heat dissipation, strong power, not easy to lose.
Drilling Machine 1pc
pair of carbon brushes
1 pair of gloves
Water pipe (length 5 meters)
Water pump 1pc
4. QWERTOUR Dual-Purpose Core Drill MQWERTOUR Dual-Purpose Core Drill Machine for Wet Drilling Concrete | Complex of Hand held and Desktop Machine | 220v 1900W 166MM
This high-tech core drilling machine uses the latest technology and the highest technological standards. This core drilling machine is designed with a hammerless design, and the hammerless design not only can reduce the wear of the core bit during the drilling and polishing, but also can prevent the knocking of the core bit during the drilling, which can be used in wet conditions and allow you to drill in water. The safety clutch is especially suitable for granite, marble, limestone, glass floatation, etc.
Dual-Purpose Core Drill Machine for Wet Drilling Concrete. Multi-directional mounting sub-handle shoulder pad design for easy punching and cushioning Drill machine for wet drilling Concrete. It is used for drilling multiple holes in different directions, also it is used for waterless drilling. Key Points: 1. Simple design, easy operation 2. Fully functional and durable 3. The body has a carbon steel structure 4. The material of the body can be changed to stainless steel.
This machine has a full copper motor with a capacity of 1900w and a no-load capacity of 1300rpm
The machine can core up to 166mm/6.5”
Input voltage of 220v
It has a handle and a shoulder pad design for easy punching and cushioning
Overload protection design
It has a threaded chuck for core bits.
What is inside the package?
Equipped with a portable bracket *1pc
submersible pump 1 PC
with three meters leather tube 1 set
200MM extension rod and extended rear bracket
304 custom screw 1 support
5. Huanyu Core Drilling Machine with Adjustable Stand 2 Uses Coring Drill Rig for Diamond Concrete Boring Holing (φ190MM 3 Speed Modes)
The core drilling machine is perfect for punching the core of all kinds of earth pipe, etc. and also for engineering samples in the construction and installation, municipal engineering, strengthening works, gas, heating, ventilation, chemical pipe laying, installation of air-conditioning equipment, and the construction of roads and buildings. This core drilling machine is suitable for punching the core of pipe with a diameter of up to 2 inches, which is made of steel or iron. Can rotate 360 degrees inside handle, adapt to more applications.
The machine has the capacity of drilling up to 190mm diameter
The power of the machine is 1350watt
Input voltage of 220v
Can produce the top speed of up to 3300rpm non-loaded
The machine has a safety clutch
Pistol grip handle
What’s inside the box?
63 drill bit
6. NEW 8″ Z-1 BLUEROCK Tools CORE DRILL W/STAND CONCRETE CORING
This drill features a blue accent and black handle and is made of high-quality materials. A useful tool for those sand-based projects. This tool is perfect for hard-to-reach areas such as walls. Get the job done with less effort and time with this Blue Rock Drill.
The NEW 8″ Z-1 BLUEROCK Tools CORE DRILL W/STAND CONCRETE CORING is a powerful and professional core drill with a capacity to drill to 8″ with the use of a 5/8″ (15mm) standard bit. The BLUEROCK core drill has a built-in stand for concrete coring and an overload protection switch for those times when you may accidentally overfill the bit.
Structure and Features:
- The motor produces 750RPM with an input voltage of 110volts with the power of 2400w
- The maximum core hole capacity of the machine is 8”
- Item weighs around 50pounds
- Safety features include a safety clutch
- The drill is fitted with a safety clutch
- Adaptable water spigot for “wet” drilling
- Drill color is red
- 2 Wrenches, 3 hex wrenches, 2 spare brushes
- Adjustable Top Bolt for Binding into Ceilings
- Water Spigot for use with Standard Garden Hoses
What is inside the box?
3 hex wrenches,
2 spare brushes
7. Coring Rig Motor, Clutch, 120VAC, 20.0A, 10″
These powerful tools have the strength to handle the toughest tasks. The built-in water swivel makes it easy to maneuver your cordless tools in tight spaces. Plus, the clutch protection mechanism keeps gears and motors safe from damage. Powerful, yet lightweight and incredibly ergonomic, these pneumatic blowers provide maximum power for the job at hand.
With a belt-driven drum, these blowers are engineered to deliver maximum power and performance while being lightweight and extremely ergonomic. This Coring Rig features a rugged, yet lightweight, aluminum crank handle. Water-cooled gears provide superior performance and reliability.
This Milwaukee machine comes with a 20amp motor with a loads speed of 450rpm and a top speed of 900rpm. The motor is capable of producing 4.8peak horsepower.
It has clutch protection with a built-in water swivel and water hose adapter.
Item weights 31 pounds.
- 11 Best Angle Grinders 2021 (4.5 Corded)
- Best Rotary Hammer Drills 2021 Corded
- 11 Best Stick Welding machines Shielded metal arc welding 2021
Core drill machine leveling
There are a lot of drill machines on the market. They are used for installing, pumping, checking, grinding, and polishing woodworking parts, as well as metalworking parts. But what is the benefit of using a drill machine to do all of this work is that it would definitely save you time and money in the long run. The thing that makes a drill machine such great to be used is that it’s fast, it’s simple to use, and it has great features.
|Brand||Max Dia possible||Max RPM||Loaded RPM||weight (pounds)||input voltage||Power watt|
|CS Unitec DBE 200 Drill Machine||8″||750||450||34pounds||110||2500|
|VEVOR 6.9″ Drill Machine||7″||1500||450||45||110||2460|
|AnEsoil Diamond Core Drill machine||7″||1800||13.22||220||3000|
|QWERTOUR Dual-Purpose Core Drill Machine||6.5″||1300||220||1900|
|Huanyu Core Drilling Machine||7.5″||3300||220||1350|
|Z-1 BLUEROCK Tools CORE DRILL machine||8″||750||50||110||2400|
As per my experience, I’ll say all core drill machines will do what they are designed for but always go for a machine that suits your requirement.
For lighter jobs and overhead coring, lightweight coring machines are best with vacuum fixation of the stand while for more heavy-duty jobs more robust and heavy machines with heavy fixation will serve the purpose better.
Also always choose the best bit type for optimal performance. Things to consider before buying a core drill. Vacuum type mounting stand is easy to fix and is very fast to operate but it requires extra care to handle and is not strong enough for heavy-duty works.